Flush With Concrete - when the anchor is set flush with the surface of the concrete, add the thickness of the material being fastened to the thread length of 7/16", and then add the space for any washers used.īelow Surface of Concrete - add the depth below the surface of the concrete to the thickness of the material being fastened, then add the space for the washer, and, finally, add 7/16" for the thread engagement.When a bolt is used in conjunction with the anchor, the length of the bolt needed is determined by considering these factors:
SDS DROP ANCOR TOOL INSTALL
It is very important not to install the anchor any closer than 1-7/8" from an unsupported edge of the concrete. The maximum torque that can be applied to the anchor once installed is 5 ft./lbs.Įach anchor must be spaced a minimum distance of 3-3/4" from each other when measured center to center. Put the Quick SDS-Plus Dropin Bit on a SDS Hammer Drill to drill a hole, then place dropin anchor in hole and finally slide the tool over the bit to hammer the dropin center pin to complete the installation. The 1/4" diameter anchor requires the hole in the fixture to be 7/16". Quick SDS-Plus Dropin Setting Tools are designed to reduce installer fatigue and make install of dropin anchors faster. The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. Deeper embedment will usually result in better holding strength. The hole in the concrete can be deeper than the minimum embedment depth for the anchor.
Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete. The minimum anchor embedment into the concrete is 1". The anchor is packaged with 100 pieces per box and does not come with a setting tool. The anchor is set using the 1/4" setting tool which is sold separately.
The length of the threads on the anchor is 7/16" in length.Įach anchor must be set in the concrete with a specific setting tool. The threads on the anchor are internal threads that measures 1/4" with 20 threads per inch, commonly referred to as 1/4"-20. The designated size of the anchor refers to the inside diameter 1/4" of the anchor or the diameter of the threaded rod or bolt that can be inserted into it. The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. The anchor requires a 3/8" hole to be drilled in the base material (Concrete only). The anchor is designed for use in a Dry environment. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. If you have any questions, please contact us.The anchor is made from Carbon Steel, and is Zinc Plated. Keep up to date with latest news and offers. After a hole has been drilled and drop-in anchor is placed in hole, use a hammer and setting tool to hammer the center pin until it has been fully expanded. Your order will be shipped within 3 days. Drop-In Setting Tools are used to set drop-in anchors. To place your order, just put drop in anchor setting tool sds in your shopping cart, click Checkout, select the payment method, make a payment and select the delivery method. The 40% discount is valid for a limited time. 3.Using the setting tool, drop-ins are installed. If you have been looking for where to buy drop in anchor setting tool sds, you have come to the right place. 2.Drop-In Anchor Setting Tool is designed for properly and consistently installing internally threaded anchors.
SDS DROP ANCOR TOOL FREE
We will deliver the order anywhere in the world for free! And we also offer free returns within one month of receiving the order. Guarantees of quality and originality of goods are provided. Only now you can buy drop in anchor setting tool sds with a 40% discount on our website!ĭrop in anchor setting tool sds is the best choice for your money on this market. We offer more than 100,000 tested and proven tools and industrial products. You can buy quality products for your construction only at us! Manufacturer Simpson Strong-Tie Part Number DIABST37-SDS Item Weight 1.6 ounces Product Dimensions 6.3 x 0.3 x 0.3 inches Item model number DIABST37-SDS Is Discontinued By Manufacturer No Material Steel Item Package Quantity 1 Measurement System Inch Usage Concrete Included Components Hardware Batteries Included? No Batteries Required? No
SDS DROP ANCOR TOOL HOW TO
How to buy drop in anchor setting tool sds Power-setting tool featuring an SDS-plus shank, designed for use with the Simpson Strong-Tie Drop-In anchor (DIAB), ensuring fast, easy and economical installation. Simpson Strong-Tie DIABST37-SDS Drop-In Anchor SDS+ Power Setting Tool for 3/8 WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Power Setting Tool for 3/8 Country of Origin:China Package dimensions:3.0L x 2.0W x 6.0H Package weight:6.4 lb drop in anchor setting tool sds Technical details Simpson Strong-Tie DIABST37-SDS Drop-In Anchor SDS+ Power Setting Tool for 3/8′ (drop in anchor setting tool sds) Description drop in anchor setting tool sds features
0 kommentar(er)
